25' ShearWater 25 Cabin Cruiser

6777995_20180717121139132_1_XLARGE.jpg
6777995_20180717121500553_1_XLARGE.jpg
6777995_20180717121457332_1_XLARGE.jpg
6777995_20180717121503797_1_XLARGE.jpg
6777995_20180717165018369_1_XLARGE.jpg
6777995_20180717165114253_1_XLARGE.jpg
6777995_20180717121655707_1_XLARGE.jpg
6777995_20180717165038598_1_XLARGE.jpg
6777995_20180717121139132_1_XLARGE.jpg
6777995_20180717121500553_1_XLARGE.jpg
6777995_20180717121457332_1_XLARGE.jpg
6777995_20180717121503797_1_XLARGE.jpg
6777995_20180717165018369_1_XLARGE.jpg
6777995_20180717165114253_1_XLARGE.jpg
6777995_20180717121655707_1_XLARGE.jpg
6777995_20180717165038598_1_XLARGE.jpg

25' ShearWater 25 Cabin Cruiser

85,000.00

Dimensions
LOA: 25 ft 0 in
Beam: 7 ft 3 in

Accommodations
Number of heads: 1


Specifications:

  • LOA 25'

  • Beam 7' 3"

  • Maximum Displacement 4,000lbs.

  • Lightship Displacement 2,019lbs

  • Keel Ballast 76 Gallons

  • Tankage::

                    FUEL - 34 Gallons

                    POTABLE WATER - 30 Gallons


Construction:

  • The structural philosophy for the boat centers on putting toughness and weight down low where it's needed and keeping higher structure as light as possible.

  • The hull is wood sheathed with fiberglass, kevlar and epoxy.  The hull bottom is two layers of 4mm Sapele plywood sandwiching one layer of 6mm Okoume Plywood and the top sides are 14mm thick red cedar strip planking.  The deck, house and internal structure are foam-cored vacuum bagged carbon composite.  Deck bulkheads and internal structure is 13mm thick Divinycel core.  The house top is 25mm thick Divinycel.  The composite parts and hull sheathing are laminated with West System Pro-Set Epoxy.  Sheer stiffeners and table legs are thin wall carbon tube.

  • The hull is painted with Imron and the rest of the boat is painted with Awlgrip. All painting by Delta Yachts in Seattle.


Cabin Interior:

  • Full Size V-Berth

  • LED Cabin Lights

  • Port-A-Pottie 

  • Propex Propane Forced Air Cabin Heat 

  • Propane 10lb Tank with Remote Shut-Off

  • Left Coast Audio MP3 Player & Stereo Speakers

  • ENO Propane 2-Burner Stove in Cockpit Enclosure


Mechanical / Electrical:

  • Single Yamaha 60hp 4-Stroke Fuel-Injected Outboard

  • 900 Hours

  • Professionally Serviced Annually

  • Racor Primary Fuel Filter

  • Spare Propeller

  • Maximum Speed - 20 Knots with the current 60hp Outboard

  • Maximum Design Speed - 25 Knots with 75hp Outboard

  • Cruising Speed Range - 13 Knots to 17 Knots

  • Mileage Range at Cruising Speed - 170 Nautical Miles

  • Top speed with the Yamaha 60hp outboard is 20 knots (25 knots with a 75hp outboard) and she also cruises very efficiently at 13 knots.  Fuel consumption at 13 knots is just over 2 gallons per hour. There is a floodable ballast tank for easier docking and more comfortable ride at anchor.  The fine entry and high flared bow means no pounding and very comfortable ride even in a lumpy chop.

  • Baystar Hydraulic Steering

  • Blue Sea Systems Breaker Panel

  • 2 Optima Batteries - One House Battery & One Start Battery with Combining Switch 

  • Guest 12Volt 2-Bank Battery Charger


Navigation / Communication

  • Garmin GPSmap 545s

  • Standard Horizon RAM+ VHF

  • AIS Receiver

  • Ritchie Compass

  • LED Navigation Lights


Ground Tackle:

  • Spade Anchor 

  • 20' of Chain

  • 150' of 3/8" Nylon Rode

  • Stern-Tie Line on Reel in Transom Locker


Miscellaneous:

Add To Cart